Crimp Version:
• Disconnect battery
• Remove M6 fender bolt near battery
• Strip and crimp Jeep Aux wire to SimpleAUX wire according to the matching wire color codes
• Bolt SimpleAUX to the fender in the location where you removed the bolt
• Use the provided M6 bolt for the second mounting
hole in the SimpleAUX

Solder Version:
• Disconnect battery
• Remove M6 fender bolt near battery
• Solder AUX wire to SimpleAUX according to the matching wire color code (bottom of SimpleAUX)
• Trim soldering flush with the board, and attach the provided cover with 3M tape backing
• Bolt SimpleAUX to the fender in the location where you removed the bolt
• You will need to provide a second M6 bolt for the second hole down the SimpleAUX
• Reconnect the battery