🦆 QUACK QUACK!

You didn’t build your Jeep to blend in. So why does your horn still sound like a Camry?

The Quack Horn from Quack Gear by BadgeGlow is a compact electronic horn that plays a loud, realistic duck quack at ~110dB. Hit the button on the trail and watch every head at the trailhead turn. Wire it to a dash switch, tap into your factory horn, or pair it with a wireless 12V relay remote for quacking from up to 100 feet away — no wires to the cab required. Works with Wranglers, Gladiators, CJs, and pretty much anything with 12 volts and a sense of humor.

What’s In The Box

• Quack Gear Quack Horn
• Wiring harness with splice terminals
• Installation guide

Trail-Ready Install

Simple two-wire install — 12V and ground. If you’ve wired a light bar or a set of rock lights, this is easier than that. The compact module tucks behind the grille, under the dash, or wherever you’ve got space. Most Jeep owners have it installed in under 15 minutes.

Wire it as a standalone trail horn with its own switch, tap into your factory horn circuit for full-time quack mode, or connect it to a wireless 12V relay remote control (sold separately) for keychain-triggered quacking from outside the vehicle. Your rig, your call.

Click Here for Instructions!

JL / JLU / JT Owners — Even Easier With SimpleAUX

Got a Jeep JL, JLU, or Gladiator JT with the factory aux switches under the console? Pair the Quack Horn with our SimpleAUX board for the cleanest install possible. The SimpleAUX gives you plug-and-play access to your factory aux switch wiring — connect the Quack Horn to one of your aux switches and you’ve got a factory-looking quack button right on your dash. No splicing, no extra switches, no mess.

~110dB Output

The Quack Horn pushes approximately 110dB — loud enough to be heard clearly across a busy trailhead or packed parking lot. That’s on par with a stock automotive horn, except yours sounds like a duck.

Go Wireless

Pair the Quack Horn with any standard 12V wireless relay remote (sold separately) and trigger your quack from a key fob. Walk away from your Jeep at a meet, hit the button, and let everyone figure out where that duck is hiding. No wiring to the cab, no dash switches — just mount the horn, connect two wires to the relay, and quack from up to 100 feet away.

Built For The Trail

• ~110dB output — as loud as a stock horn, 100% more duck
• 12V automotive power — works with any Jeep or off-road vehicle
• Wireless compatible — works with any 12V relay remote (sold separately)
• Solid-state electronics — no moving parts, nothing to rattle loose on the rocks
• Weatherproof enclosure* — sealed against rain, mud, dust, creek crossings, and whatever else your Jeep gets into
• Instant on — quacks the moment you hit the switch, no boot-up delay
• No battery drain — zero draw when the horn or switch isn’t pressed

Vehicle Compatibility

• Jeep Wrangler JK / JL / JLU
• Jeep Gladiator JT
• Jeep CJ / YJ / TJ
• Jeep Cherokee XJ
• Ford Bronco
• Side-by-sides & UTVs
• Rock crawlers & trail rigs
• Parade & show Jeeps
• Any 12V off-road vehicle

Frequently Asked Questions

How loud is it? Approximately 110dB — loud enough that the group ahead of you on the trail will hear it. That’s roughly the same volume as a stock car horn.

Can I trigger it wirelessly? Yes. The Quack Horn works with any standard 12V wireless relay remote control (sold separately). Wire the horn’s 12V input through the relay and trigger it from the key fob. Great for Jeep meets, trail runs, or pranking your friends in the parking lot.

Does it replace my factory horn? Most customers wire it as a secondary horn with a momentary switch on the dash. That way you keep your factory horn for the street and flip to quack mode on the trail. You can also run it completely standalone with a wireless remote — no connection to the factory horn at all.

Does it sound like a real duck? It plays a recording of an actual duck quack. Not a tone. Not a beep. A duck. A very loud, very confident duck.

Is this for on-road use? The Quack Horn is sold as an off-road and novelty accessory only. It is not intended to replace your DOT-required horn for street use. Keep your factory horn intact for road driving. Check your local laws for more information.

Will it survive trail abuse? The module is sealed in a weatherproof enclosure with no moving parts. It handles vibration, dust, mud, and water spray without issue. Mount it somewhere protected and forget about it. The horn must be installed facing downward.

Will it drain my battery? No. The module only draws power when the horn button or switch is actively pressed. When you’re not quacking, it draws nothing.

What wireless remote should I use? Any 12V wireless relay module with a key fob will work. These are widely available online — search for “12V wireless relay remote control.” Look for one with a momentary mode (press and hold to activate) rather than latching (toggle on/off).

I have a JL / JLU / JT with factory aux switches. Can I use those? Yes — pair the Quack Horn with our SimpleAUX board (sold separately). It gives you plug-and-play access to your factory aux switch wiring, so you can trigger the Quack Horn from one of your factory dash switches. No extra switches or drilling required.

What other products are in the Quack Gear line? The Quack Horn is the first product in the Quack Gear line by BadgeGlow. Stay tuned — more quack is coming.